Flush Diaphragm Pressure Sensor
M20x1.5, R1/2, G1/2
0bar ~ 0.35bar…350bar
Flush Diaphragm
New Product Change Notice (PCN) effective Jan 1, 2025. MICROSENSOR appreciate your understanding.
-
Products
- Solutions
- Service Support
Pages
- Pressure Sensor
- Pressure Transmitter and Transducer
- What is a Pressure Transducer？
- Level Transmitter and Sensors
- Differential Pressure Sensors
- Differential Pressure Transmitters
- Level transmitter for Fuel and Chemical
- Water Pressure Sensors
- Tank Pressure Sensors and Transmitters
- Hydrostatic Level Measurement
- Oil Pressure Sensors and Transmitters
- Company
Anti-corrosive Pressure Sensor
MPM280Ti
- · Φ19mm
- · -1bar...0bar~1bar…700bar
- · Titanium Diaphragm
Used For
Seawater or Corrosive Media Measurement, Liquid Pressure System and Switch
Leave a MessageMPM280Ti
Used For
Seawater or Corrosive Media Measurement, Liquid Pressure System and Switch
Leave a MessageMPM280Ti Anti-corrosive Pressure Sensor is unique for strongly corrosive media or seawater measurement. Its anti-corrosive performance is far better than stainless steel. The corrosive media being measured encompass a range of corrosive factors, such as pitting, acid erosion, stress corrosion, alkaline substances, chlorides, chlorine compounds, nitric acid, and various other corrosive substances. It uses all titanium material in construction, TC4 housing material and TA1 diaphragm.
Features
• Pressure range: 0bar ~ 1.0bar…700bar
• Gauge, Absolute and Sealed gauge
• Constant current or Constant voltage power supply for option
• Isolated construction to measure various fluid media
• Φ19mm OEM pressure element
• Different metals with excellent corrosion resistance for option
• Tnegtive pressure measurement is available, the lowest to around -1bar
Electrical Performance
• Power supply: ≤2.0mA DC
• Electrical connection: φ0.5mm Kovar pin or 100mm silicon rubber flexible wires
• Common mode voltage output: 50% of input (typ.)
• Input impedance: 3kΩ~8kΩ
Image:
MPM280Ti Anti-corrosive Pressure Sensor is unique for strongly corrosive media or seawater measurement. Its anti-corrosive performance is far better than stainless steel. The corrosive media being measured encompass a range of corrosive factors, such as pitting, acid erosion, stress corrosion, alkaline substances, chlorides, chlorine compounds, nitric acid, and various other corrosive substances. It uses all titanium material in construction, TC4 housing material and TA1 diaphragm.
Features
• Pressure range: 0bar ~ 1.0bar…700bar
• Gauge, Absolute and Sealed gauge
• Constant current or Constant voltage power supply for option
• Isolated construction to measure various fluid media
• Φ19mm OEM pressure element
• Different metals with excellent corrosion resistance for option
• Tnegtive pressure measurement is available, the lowest to around -1bar
Electrical Performance
• Power supply: ≤2.0mA DC
• Electrical connection: φ0.5mm Kovar pin or 100mm silicon rubber flexible wires
• Common mode voltage output: 50% of input (typ.)
• Input impedance: 3kΩ~8kΩ
Read / Download our Datasheet in PDF
Download
Relate Solutions
-
MVR Evaporation System Pressure, Temperature, and Flow Monitoring
The MVR evaporation equipment requires the use of intelligent pressure transmitters to monitor the liquid level in the separator for feed control. It also monitors the liquid level in the condensate tank, providing timely water replenishment for the condenser, allowing it to condense rapidly. Concurrently, the liquid level height of the raw material tank and the mother liquor tank is monitored. When the liquid level is depleted, raw liquid is added to maintain the normal progress of the process. Intelligent temperature transmitters are used to monitor the steam temperature in the heater, continuously heating the raw liquid for the separation of the solution and the solute. It also monitors the temperature of the separator cavity for efficient separation of the solute and solvent. Flowmeters are used to calculate the volume of the raw material liquid in the feed pump, accumulating the flow.
more info... -
Evaporator
The production of different paste-like drugs uses a concentration process when processing raw materials. The evaporator features high temperature and vacuum. After the concentration process, it needs to be cleaned with efficient and strong chemical detergents. The pressure, temperature and level transmitters in the evaporator effectively ensure the normal and efficient operation of the concentration and washing process.
more info... -
Groundwater Monitoring Well Level Monitoring
Real-time monitoring of groundwater monitoring wells in the water source area is conducted using monitoring instruments, obtaining data such as water level and flow, thus allowing timely understanding of groundwater resource extraction and usage, providing early warnings, and ensuring the rational use of water resources.
more info... -
Bridge Culvert Flood Monitoring
Real-time monitoring the low-ling areas, underpasses and bridge culverts. The current level and alarming messages are automatically displayed on the screen, such as “Passage”, “Allowing”, and “No entering”. The alarm will be triggered when the level is too high, aiming to ensure the personnel's safety.
more info...
Copyright © 2026 MICRO SENSOR CO., LTD
