Pressure Transmitter Suitable For General Industry
Range: 0~250mbar to 0~250bar
Accuracy:±0.25%FS, ±0.5%FS
Output: 4mA~20mA DC, 0/1V~5/10V DC, 0.5V~4.5V DC
New Product Change Notice (PCN) effective Jan 1, 2025. MICROSENSOR appreciate your understanding.
-
Products
- Solutions
- Service Support
Pages
- Pressure Sensor
- Pressure Transmitter and Transducer
- What is a Pressure Transducer？
- Level Transmitter and Sensors
- Differential Pressure Sensors
- Differential Pressure Transmitters
- Level transmitter for Fuel and Chemical
- Water Pressure Sensors
- Tank Pressure Sensors and Transmitters
- Hydrostatic Level Measurement
- Oil Pressure Sensors and Transmitters
- Company
Flushing Ring
MW7000
- · Flushing ring: 316 SS
- · Flange diameter: DN25~DN100, 1-in~4-in
Used For
Clean the measuring flange diaphragm.
Leave a MessageMW7000
Used For
Clean the measuring flange diaphragm.
Leave a MessageIntroduction
The flushing ring is a component of fluid piping systems installed between instrumentation and pipelines. Its primary function is to clean the measuring flange diaphragm, preventing errors caused by the attachment of liquid or impurities, thereby enhancing the accuracy and reliability of the transmitter. It facilitates fluid flushing, cleaning, and draining functions to ensure a favorable medium environment on the instrument diaphragm surface. The MW7000 flushing ring catalog includes flushing ring and flushing ring with mounted valve(s).
Functions
• Flushing ring
Equipped with open/closed flushing bores (with plug screws) to facilitate inlet and outlet of flushing media.
• Flushing ring with mounted valve
Equipped with open/closed flushing bores (with plug screws) to selectively allow or block internal media output.
The inlet side is fitted with a manual valve to regulate the flow of flushing media by adjusting the valve opening, to accommodate flushing requirements.
• Flushing ring with mounted valves
Equipped with manual valves at both inlet and outlet sides to regulate the flow of flushing media at both sides by adjusting the valve opening, to accommodate flushing requirements.
Image:
Introduction
The flushing ring is a component of fluid piping systems installed between instrumentation and pipelines. Its primary function is to clean the measuring flange diaphragm, preventing errors caused by the attachment of liquid or impurities, thereby enhancing the accuracy and reliability of the transmitter. It facilitates fluid flushing, cleaning, and draining functions to ensure a favorable medium environment on the instrument diaphragm surface. The MW7000 flushing ring catalog includes flushing ring and flushing ring with mounted valve(s).
Functions
• Flushing ring
Equipped with open/closed flushing bores (with plug screws) to facilitate inlet and outlet of flushing media.
• Flushing ring with mounted valve
Equipped with open/closed flushing bores (with plug screws) to selectively allow or block internal media output.
The inlet side is fitted with a manual valve to regulate the flow of flushing media by adjusting the valve opening, to accommodate flushing requirements.
• Flushing ring with mounted valves
Equipped with manual valves at both inlet and outlet sides to regulate the flow of flushing media at both sides by adjusting the valve opening, to accommodate flushing requirements.
Read / Download our Datasheet in PDF
Download
Related Articles
- Reliable Pressure Transmitters for Chemical Injection Skids
2026-06-25 - New Release: M20H Pressure Transmitter for Liquid Cooling CDU Systems
2026-06-17 - Reliability at Height: Precision Pressure Monitoring for MEWPs
2026-05-29 - Enhancing Hydrogen Electrolyzer Safety with MDM7000 Pressure Transmitter
2026-05-29
- Related Products
- Related Accessories
-
-
-
Digital RS485 HART Pressure Transmitter
Range:-1bar...0~0.1bar…1000bar
Details
RS485/HART® communication protocol
Accuracy: ±0.1%FS, ±0.25%FS, ±0.5%FS
DNV approved for ship use -
Intelligent Level Transmitter
3, 5, 7, 10, 20, 35, 70, 100, 200mH2O
Details
Accuracy: ±0.1%FS (Typ.)
HART Protocol
DNV approved for ship use
Relate Solutions
-
Beer Fermentation Tank
When the malt juice cools to the appropriate temperature, adding yeast initiates the fermentation process. During this process, yeast converts maltose dissolved in the malt juice into carbon dioxide and alcohol. To ensure a smooth fermentation process, it is necessary to measure the temperature and liquid level of the fermentation tank, as well as the carbon dioxide in the recovery pipe and the pressure in the yeast pipe.
more info... -
Dryer
Dryers are often used to dry medicines or extract active ingredients from traditional Chinese medicines, which are easily decomposed in high temperature environments. Temperature measurement is required in the heating area, cooling area and material outlet of the dryer, and pressure transmitters are used to measure the pressure of air or gas to help adjust the air flow speed and fan operation status, or measure the pressure of steam, hot water, and hot oil pipelines.
more info... -
Water Plant Monitoring
Pressure, flow, and level measuring instruments are deployed in water tanks, pipelines, and water inlets/outlets. This helps to manage the macro-control of production data in the water plant. Measuring instruments ensure smooth operation and normal production.
more info... -
Drying Cylinder
To eliminate any remaining moisture in the paper web, the paper machine's drying section uses rollers heated by steam. The inner cylinder surface develops a condensate coating as the steam loses heat, which affects the heat transfer to the paper. Continuous siphoning is required to remove this condensate. Pressure measurements at the cylinder inlet and outlet monitor the appropriate heat transfer level to the paper.
more info...
Copyright © 2026 MICRO SENSOR CO., LTD
